SMS coveralls for remediation crews
These single-use SMS nonwoven coveralls have an attached hood and boot covers, a front zipper and elastic wrists and ankles. Order them by the case for general cleanup and remediation support work. For mold or lead work, select protective clothing under your employer’s task and exposure assessment.

Garment specifications
| Model | PL-CA-115-1-1 |
|---|---|
| Fabric | SMS nonwoven |
| Configuration | Attached hood and boot covers, front zipper, elastic wrists and ankles |
| Sizes | XL, 2XL and 3XL |
| Suits per case | 10, 25 or 50, one size per case |
PPE selection for remediation projects
Use the mold remediation guide and the lead abatement guide to review task-specific PPE considerations. Type 5/6 certification has not been verified for this model. For asbestos PPE selection, see the asbestos coverall guide. If your project specifies Category III Type 5/6, review the model-specific documentation for PL-CA-107-1 with the person responsible for PPE selection.
Typical uses for abatement and remediation crews
Abatement and remediation contractors go through a lot of suits, so many keep a lower-cost hooded coverall on hand for the support tasks around a project. Typical uses, where your PPE plan allows an SMS suit without a Type rating, include:
- General cleanup and debris removal on remediation and restoration jobs.
- Equipment cleaning and decontamination support outside the regulated work area.
- Water, fire and smoke damage cleanup where dirt and soot need to stay off work clothes.
- Spare suits for crew changes, breaks and torn garments, so work does not stop.
For work inside a regulated asbestos or lead area, use the PPE your competent person specifies. Where a certified Category III Type 5/6 suit is required, choose PL-CA-107-1.
Putting on and taking off a hooded coverall
- Check the suit for tears before you put it on, and choose a size that lets you bend and reach without straining the seams.
- Step into the legs and boot covers, pull the suit up over your arms and close the front zipper fully.
- Pull the hood up over your head and fit it around your respirator or face mask if one is used.
- To take it off, unzip, roll the suit down and away from your body so the outside surface folds inward, then step out of the boot covers.
- Bag the used suit and dispose of it according to your site procedure. Do not reuse single-use coveralls.
Not sure which size to order? The size and case-pack guide helps you plan sizes and case quantities.
Case ordering example
For a two-week target of 240 suits, order four 50-suit cases in 2XL, one 25-suit case in XL and one 25-suit case in 3XL. That gives you 250 suits, including 10 spares, for $650 before shipping and tax.
Compare other Poltex coveralls
- PL-CA-108 restoration coveralls use 60 GSM SMS and are listed for restoration teams handling water, fire and smoke cleanup.
- PL-CA-113 work coveralls are a hooded, booted option for routine warehouse, shop and facility cleanup. Ask Poltex for its current fabric specification.
- PL-CA-110 disposable coveralls use 60 GSM SMS and are listed as an outer layer for general industrial dust and dirt work.
Frequently asked questions
What sizes and case packs are available?
Choose XL, 2XL or 3XL in cases of 10, 25 or 50 suits. Each case contains one size, and cart quantity counts cases.
How much does each suit cost?
The cost is $4.00 per suit in a 10-suit case, $3.00 in a 25-suit case and $2.50 in a 50-suit case, before shipping and tax.
What is the fabric weight?
The catalog lists SMS nonwoven. Contact Poltex for the exact model datasheet if your order specifies a fabric weight.
For mixed-size bulk orders or scheduled deliveries, contact Poltex with your size mix, case quantities and delivery ZIP code.





Reviews
There are no reviews yet.