Laminated Biological Protective Suits – Certified Cat III Type 5/6 Base Garment

PPE Category III • Type 5 • Type 6 • CENTROCOT Italy (Notified Body 0624)

Laminated protective suits for professional biological-risk, contamination-control and cleanup applications. Type 5/6 confirms particulate and limited liquid-chemical protection classifications; biological-agent protection must be supported by separate biological barrier documentation such as EN 14126 where applicable.

Poltex International supplies laminated biological protective suits for professional buyers who require disposable full-body barrier garments for selected biological-hazard, contamination-control and cleanup applications. A laminated garment can provide stronger fluid-barrier performance than basic nonwoven coveralls, but biological protection depends on the complete garment design and documented barrier testing.

No garment should be assumed to protect against blood, body fluids, viruses or other infectious agents solely because it is laminated. Request the current technical data before specifying the suit for a biological exposure.

The laminated garment is backed by PPE Category III, Type 5 and Type 6 certification documentation from CENTROCOT, Italy (Notified Body 0624).

• Type 5 addresses airborne solid particulates.
• Type 6 addresses limited protection against liquid chemical spray.

Important: Type 5/6 certification does not by itself establish protection against infective biological agents. Biological-agent claims should be based on separate testing/documentation such as EN 14126 where applicable. Contact Poltex International for the available certificate and technical file before specifying the suit for biological-risk work.

• Selected biological-hazard and contamination-control tasks
• Professional cleanup and remediation
• Laboratory and controlled-area support work where garment documentation is appropriate
• Healthcare or institutional environments where the required barrier performance is documented
• Emergency-preparedness and facility PPE programs
• Contractor and distributor bulk requirements

Application suitability must always be confirmed against the actual hazard and current product documentation.

• Define the biological hazard and route of exposure: contact, splash, droplets and aerosols are not the same risk.
• Review barrier test data: material thickness or a laminated appearance alone does not establish biological protection.
• Check seams, zipper and interfaces: complete garment construction affects barrier performance.
• Consider the full PPE ensemble: gloves, footwear, eye protection and respiratory protection may be required.
• Match the garment to the task: use the employer’s hazard assessment and applicable infection-control or workplace requirements.

• Disposable Hazmat Suit with Hood & Boot Covers
• Disposable SMS Coveralls
• Disposable Coveralls USA
• Laminated Chemical Protective Suits

No. Biological protection should be based on the garment’s documented barrier performance and the specific exposure risk, not simply the word laminated.

Only when the garment’s current documentation supports the required barrier performance for the intended exposure and the employer’s PPE assessment specifies it.

Yes. Contact Poltex International for current U.S. stock, available sizes, case quantities, technical documents and volume pricing.

Contact Poltex International for current U.S. stock, available sizes, case quantities and technical documentation for your application.